How to get the right VAR setup sheet

For PAX:

TSYS (1 terminal location) - Sierra platform

TSYS (multi terminals at location) - TransIT Multipass platform (Recommended for multi-terminal sites / OrderTab)

Each card reader must have a separate Device ID.
If devices are being set up in OrderCounter’s Pax Store:
- Ensure the Multipass welcome email is forwarded to the OrderCounter support team.
  - This allows us to control the configuration and setup centrally.
Auto Batch: This must be enabled on the processor’s side to ensure all devices batch out properly each night.

First Data - Rapid Connect platform, one terminal ID per machine

Not widely deployed so be sure to double check all functionality prior to deployment

For Datacap:

TSYS - Build one VAR Sheet for Datacap NetEPay Hosted.

Include the HCPOS ID and Auth Code.
If using Pre-Auth, the Capture Delay / Host Capture Flag must be set to: “H” (Hold Until Released).
Terminal quantity does not matter, just one VAR sheet per rooftop.

First Data - Build one VAR sheet for Rapid Connect NetePay Hosted Bridge.

Did you find it helpful? Yes No

POS VAR Requests - OrderCounter - VAR Types Print